Vx 354 Programming Software

I just bought a VX-354 two way radio. Billa full movie 720p in hindi dubbed download 2017. Ritmix rh 533 usb drajver. I have been looking online for quite some time and i cant seem to find programming software and cables. All i want to do is program in a couple more frequencies and put the scan feature on one of the 'programmable' buttons.

Vertex VX-351 or VX-354 Cloning Requires a CT-27A Radio-to-Radio Cable Adding a new Vertex Standard or radios to your existing fleet is a simple process with the built-in cloning feature. All you need is a Vertex cloning cable to transfer the programming information.

A VX-351 will not clone to a VX-354 and all models must be identical using the same VHF or UHF band. VX-350 Series Cloning is a 6 Step Procedure • Turn both radios OFF • Connect the CT-27 cloning cable between the MIC/SP jacks of the two radios. • Press and hold the “Side 1” key and the “PTT” key while turning the radio ON. The LED will remain off and if a VX-354, it will display “ CLONE”. • Repeat step 3 on the other radio. • To switch the radio to receive data, press the “Side 1” key.

Then the LED indicator will glow “ Green“. • To switch the radio to transmit data, press the “PTT” key. Then the LED indicator will glow “ Red“. When the data transfer is successful, the VX-354 display will return to “CLONE” or if a VX-351, the TX/BUSY indicator will turn off. You are now ready for the next radio or turn both radios off and disconnect the CT-27 cable.

You can then power on the radios and begin normal operation.